Subnet Mask; Default Gateway - Denon AVR-X5200W Owner's Manual

Contents Connections
Settings
Configure the proxy settings and IP address.
If you are using a broadband router (DHCP function), the information
0
required for network connection such as the IP address will be
automatically configured since the DHCP function is set to "On" in the
default settings of this unit.
Set up the IP Address, Subnet Mask, Default Gateway and DNS server
0
information only when assigning a fixed IP address or when connecting
to a network without DHCP function.
Configure the proxy settings when using a proxy server to connect to
0
the Internet.
Network/Settings
DHCP
-IP Address

-Subnet Mask

-Default Gateway

-Primary DNS
-Secondary DNS
Proxy
-Address
-Port
Save
Cancel
Configures the network settings manually
.
o DHCP
Selects how to connect to the network.
On
(Default):
Off:
Front panel Display
Playback
Off
192.168.001.002
255.255.255.000
192.168.001.001
192.168.001.001
000.000.000.000
On(Address)
000.000.000.000
00000
Configure the network settings
automatically from your router.
Configure the network settings manually.
Rear panel
Settings
o IP Address
Set the IP address within the ranges shown below.
The Network Audio function cannot be used if other IP addresses
0
are set.
CLASS A:10.0.0.1 - 10.255.255.254
CLASS B:172.16.0.1 - 172.31.255.254
CLASS C:192.168.0.1 - 192.168.255.254
o Subnet Mask
When connecting an xDSL modem or connector adapter directly to
this unit, input the subnet mask indicated in the documentation
supplied by your provider. Normally input 255.255.255.0.
o Default Gateway
When connected to a gateway (router), input its IP address.
o Primary DNS, Secondary DNS
If there is only one DNS address indicated in the documentation
supplied by your provider, input it at "Primary DNS". If two or more
DNS are provided by your provider, enter both "Primary DNS" and
"Secondary DNS".
256 Remote
Tips Appendix
Index