Denon AVR-X5200W Owner's Manual page 227

Contents Connections
o Detailed settings when "Assign Mode" is set to
"11.1ch"
When "Assign Mode" is set to "11.1ch", set the following items.
n Height Speakers
Select the number of the height speakers used in MAIN ZONE.
2 Height Speakers
Uses a set of (two) height speakers.
(Default):
4 Height Speakers : Uses two sets of (four) height speakers.
Select when the Dolby Atmos Enabled
Using Dolby Speakers :
speakers are connected.
Upgrade (Auro-3D)
5 Height Speakers:
Uses five height speakers
z If "5 Height Speakers" is selected, connect the Front Height speakers to the
Height 1 terminals, the Surround Height speakers to the Height 2 terminals and
the Top Surround speaker to the Subwoofer 2 terminal.
Front panel Display
Playback Settings
n Height Layout
Select the type of the height speakers used.
GWhen "Height Speakers" is set to "2 Height Speakers"H
Select the height channel used.
Select items
Front Height
(Default)
Top Front
Top Middle
Top Rear
Rear Height
z
Rear panel 227
Tips
AUDIO OUT connectors
Remote Index
Appendix
HEIGHT1
Front Height
Top Front
Top Middle
Top Rear
Rear Height