Tuning In By Entering The Frequency (Direct Tune) - Denon AVR-X5200W Owner's Manual

Contents Connections
Tuning in by entering the frequency
(Direct Tune)
You can enter the receiving frequency directly to tune in.
1
Press OPTION when the input source is "HD Radio".
The option menu screen is displayed.
2
Use ui to select "Direct Tune", then press ENTER.
The screen that lets you enter the frequency is displayed.
3
Use ui or 0 – 9 to select a number and press p.
If o is pressed, the immediately preceding input is cancelled.
0
4
Repeat step 3 and enter the frequency of the radio
station you want to hear.
5
When setting is completed, press ENTER.
The preset frequency is tuned in.
Front panel Display
Playback Settings
Changing the tune mode (Tune Mode)
You can change the mode for tuning into FM and AM broadcasts. If you
cannot tune in automatically with "Auto" mode, change the mode to
"Manual" and tune in manually.
1
Press OPTION when the input source is "HD Radio".
The option menu screen is displayed.
2
Use ui to select "Tune Mode", then press ENTER.
3
Use o p to select the tune mode, then press ENTER.
Rear panel 101
Tips
Automatically search for and tune to a receivable
Auto:
radio station.
HD-Auto : Automatically tune to the HD Radio station.
Automatically tune to an analog station and analog
Analog-Auto:
HD Radio station.
Manually change the frequency one step at a time
Manual:
each time the button is pressed.
Analog- Manually tune to an analog station and analog HD
Manual: Radio station.
Remote Index
Appendix