Mec AV4m Operating Instructions

Mec AV4m Operating Instructions

Diagnosing- and quickcharger with display for nicd and nimh batteries (aa & aaa) mec art.-nr.: 153-04122-380

Advertisement

Quick Links

OPERATING INSTRUCTIONS

Diagnosing- and Quickcharger with Display
for NiCd and NiMH Batteries (AA & AAA)
Dear Customer!
Thank you very much for your trust in us and our product.
Please read these operating instructions carefully before start of operation.
MEC-Energietechnik GmbH
1. Saftey- and Warning notices
ATTENTION: 100-240 Volts AC voltage, Device is not suitable for children – danger of life!!
ATTENTION: The charger is exclusively designed for rechargeable batteries (NiCd & NiMH) from
180 to 3300 mAh, contempt leads to EXPLOSION RISK!
ATTENTION: Please consider the charging instructions from the battery manufacturer before charging!
During insertion of the battery please mind the correct polarity!
Don't use the device near flammable gases, solvents or vapours. EXPLOSION RISK!
Use the device only in dry rooms and protect against dust, heat (>40°C) and humidity (>80% rel.)
Protect against direct solar radiation.
No fluids of any kind must get into the device.
Do not cover the ventilation slots during operation.
Only use the provided power supply.
In case of obvious damage or malfunction immediately shut off the device and protect against unintended
reconnection.
Clean with a dry cloth only.
Repair work must only be accomplished by authorized companies or specialized technical staff.
Telefon: +43 (0) 4242 / 55 100 | fax: - 11 | e-mail: office@MEC-Energietechnik.at | Web: http://www.mec-energietechnik.com
-- AV4m --
153-04122-380
MEC Art.-Nr.:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AV4m and is the answer not in the manual?

Questions and answers

Summary of Contents for Mec AV4m

  • Page 1: Operating Instructions

    In case of obvious damage or malfunction immediately shut off the device and protect against unintended reconnection.  Clean with a dry cloth only.  Repair work must only be accomplished by authorized companies or specialized technical staff. Telefon: +43 (0) 4242 / 55 100 | fax: - 11 | e-mail: office@MEC-Energietechnik.at | Web: http://www.mec-energietechnik.com...
  • Page 2 The systematic usage of your AV4m can extend the lifetime of your battery, therefore save your money and make an effective contribution to environmental protection.
  • Page 3 Starting up and Charging The proper start up of the AV4m is performed by connecting the cable from the provided power supply or the 12V car adapter with the AV4m and the respective power source. If no battery is inserted during start up, “nob“ is shown in the display.
  • Page 4 5.6. Forming If one or more deep discharged batteries are inserted, the AV4m automatically tries to reach the required cell voltage via forming. Therefore the battery is reactivated by regulated current pulses. This process is indicated in the display by showing “For“. If the forming succeeds a complete charging cycle is started automatically.

Table of Contents