Cable Connection; Connecting The Audio Source Via An Audio Cable; Charging The Audio Source - Loewe Audiodesign Speaker 2go 52231 Series Operating Instructions Manual

Speaker 2go
Operating instructions

Cable connection

Connecting the audio source via an audio cable

You can connect your Speaker 2go to your audio source, e.g. mobile phone, music player, etc.,
using an audio cable with 3.5mm jack plug (included in the set of equipment supplied).
Use the audio cable (S) with 3.5mm jack plug to connect the analogue stereo
audio output of your audio source (A) with the AUX IN stereo audio input
of the Speaker 2go.
The audio signal (page 26) is now replayed via the audio cable.

Charging the audio source

You may charge the battery of your audio source, e.g. a mobile phone, via your Speaker 2go.
To do so, use an USB cable with type A jack plug (available from your dealer) suitable for your
audio source.
Insert the type A plug of the USB cable into the USB socket
only of the Speaker 2go.
ON/OFF
With power adapter, charging will take place independent on setting of sliding
switch
ing switch
If the battery capacity of the Speaker 2go is below 25%, external devices will
no longer be charged.
A
11
. Without power adapter, charging function is only activated with slid-
11
at ON position.
- 23 -
S
13
S
14 USB charge
13