Makita LS0714 Technical Information page 19

R
epair
7. Lift up the jig until it reach the pan head screw M5x16 of laser box side. See Fig. 20-4.
8.Adjust the laser line so as to parallel the line of jig by turning hex socket set screw M4x6 (B). See Fig. 20-7.
Fig. 20-7
Line of jig for laser line
adjustment (1R315)
9. In order to move the laser line onto the line of jig for laser line adjustment, slide the position of thumb screw M5x24
to left or right as Fig. 20-8. Finally driveThumb screw M5x24 to fix the laser section.
Fig. 20-8
Line of jig for
laser line adjustment (1R315)
Laser box
Laser line adjusted so as to
parallel the line of jig
Laser line aligned
with the line of jig
Hex socket set
screw M4x6 (B)
Be sure to hex wrench
clockwise and slowly in
order to avoid backlash
of screw.
Thumb screw M5x24
P 19/ 26