R
epair
[8] Removing turn base from base
1. Remove guide fence and kerf board. See Fig. 8-1.
2. Remove hex lock nut M8-13 using socket wrench.And then, remove turn base from base while pushing lock lever in
the direction designated with arrow. See Fig. 8-2.
Fig. 8-1
Hex socket headbolt M6x25
Kerf board
Tapping screw bind
CT 4x12
Fig. 8-2
Turn base complete
Base
Guide fence
Tapping screw bind CT 4x12
Kerf board
Socket wrench
Hex lock nut M8-13
Flat washer 8
Lock lever
Remove turn base from base complete
while pushing down lock lever.
P 9/ 26