Makita LS0714 Technical Information page 3

R
epair
WARNING: Be sure to unplug the tool before maintenance or repair.
See the instruction manual on how to handle the tool.
Remove the following parts from the machine for safety before repair/ maintenance:
*Saw Blade *Inner Flange *Outer Flange *Dust Nozzle
[1] Lubrication
1. Apply Makita grease N. No.1 to the following portions designated by black triangle to protect parts and product from
unusual abrasion. See Fig. 1.
Item No. Parts description
16 Blade case
136 Arm complete
139 Stopper plate
145 Front arm complete
153 O ring 5
155 Pipe 16-90
156 Arm holder
158 Screw M10
159, 161 Flat washer 10
160 Thrust needle gauge 1024
Fig. 1
Linear ball bearing, factory-assembled
Apply 6g to the gear room if the room has been washed for cleaning.
Both pivot portions where front arm (item No. 145) contacts
Inside of hole which accepts arm holder's (156) rib portion.
Linear ball bearing in which pipe portion of front arm (145) slides
Surface to which inner wall of arm holder (156) contacts
Pivot portion where blade case (16) contacts
Whole
Pipe ends to which axis holes of front arm complete (145) contact
Swivel portion where arm complete (136) contacts
Threads
Surfaces where thrust needle gauge 1024 (160) contacts
Head and reverse side to which washers 10 (159 and 161) contact
Stopper pin
Portion to lubricate
Helical gear 47
P 3 / 26