Led Indicator Lights - Whirlpool 8LIECH-SCSSFP5W User Manual

12. Replace the drain plug and cap.
13. Place a fresh bottle of water into the machine and operate as usual.
14. This procedure must be repeated every 3 to 6 months, depending on mineral content and usage of
water cooler.

LED INDICATOR LIGHTS

1
POWER INDICATOR
When the LED light is constantly lit it indicates that power
is being supplied to the unit.
2
HEATER INDICATOR
When the LED light is flashing it indicates that the heating
system is working. When the LED light is constantly lit, it
indicates that the hot water is ready. When the LED light
is off it shows that the heating system is off.
3
COOLING INDICATOR
When the LED light is flashing it indicates that the cooling
system is working. When the LED light is is constantly lit, it indicates that the cold water is ready.
When the LED light is off it indicates that the cooling system is off.
4
EMPTY BOTTLE INDICATOR
The LED light is constantly lit when the water bottle has enough water for normal operation. When
the LED light is flashing it indicates that the level of water in the bottle is low and a new full bottle
should be installed.
5
SELF CLEAN INDICATOR
When the LED light is flashing it indicates that the self-cleaning takes place. When the LED light
is constantly lit it indicates that the self-clean protection is on.
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 1-855-594-4755 for assistance.
Model # 8LIECH-SCSSFP5W: Page 13
SELF CLEAN
1
2
3
5
4