Technical Data - Bosch GLM Professional 250 VF Original Instructions Manual

OBJ_BUCH-947-004.book Page 22 Friday, July 3, 2009 8:44 AM
22 | English

Technical Data

Digital Laser Rangefinder
Article number
Optical sight
Measuring range
Measuring accuracy (typically)
Lowest indication unit
Operating temperature
Storage temperature
Relative air humidity, max.
Laser class
Laser type
Laser beam diameter (at 25 °C) approx.
– at 10 m distance
– at 150 m distance
Batteries
Rechargeable batteries
Battery live, approximately
– Individual measurements
– Continuous measurement
Weight according to EPTA-Procedure 01/2003
Dimensions
Degree of protection
A) The working range increases depending on how well the laser light is reflected from the surface of the target (scat-
tered, not reflective) and with increased brightness of the laser point to the ambient light intensity (interior spaces,
twilight). In unfavourable conditions (e.g. when measuring outdoors at intense sunlight), it may be necessary to use
the target plate.
B) In unfavourable conditions (e.g. at intense sunlight or an insufficiently reflecting surface), the maximum deviation
±
is 20 mm per 150 m. In favourable conditions, a deviation influence of
C) In the continuous measurement function, the maximum operating temperature is +40 °C.
D) Less measurements are possible when using 1.2 V rechargeable batteries than with 1.5 V batteries. The battery
life listed refers to measurements without display illumination and audio signal.
Please observe the article number on the type plate of your measuring tool. The trade names of the individual
measuring tools may vary.
The measuring tool can be clearly identified with the serial number 20 on the type plate.
1 609 929 T67 | (3.7.09)
GLM 150
Professional
3 601 K72 000
–
A)
0.05–150 m
B)
±1.0 mm
0.1 mm
C)
–10 °C...+50 °C
–20 °C...+70 °C
90 %
2
635 nm, <1 mW
6 mm
90 mm
4 x 1.5 V LR03 (AAA)
4 x 1.2 V HR03 (AAA)
D)
30000
D)
5 h
0.24 kg
66 x 120 x 37 mm
IP 54 (dust and splash IP 54 (dust and splash
water protected)
±
0.05 mm/m must be taken into account.
GLM 250 VF
Professional
3 601 K72 100
A)
0.05–250 m
B)
±1.0 mm
0.1 mm
C)
–10 °C...+50 °C
–20 °C...+70 °C
90 %
2
635 nm, <1 mW
6 mm
90 mm
4 x 1.5 V LR03 (AAA)
4 x 1.2 V HR03 (AAA)
D)
30000
D)
5 h
0.24 kg
66 x 120 x 37 mm
water protected)
Bosch Power Tools