HP StoreOnce D2D Backup System Gen2E Maintenance And Service Manual page 15

1. Install the latest BIOS revision from the relevant product site. All BIOS revisions can be found
at http://www.hp.com/support/downloads
to disk Backup — HP D2D Backup Systems).
2. Reboot the system. During the system BIOS boot process, when the prompt to Press F9 is
visible, press the F9 key to enter the RBSU (ROM-based Setup Utility) or BIOS Setup. This is
so that you can change.
3. Change the Performance options, as shown in the following table.
NOTE: Unless noted otherwise, the settings apply to all Gen2e products.
Table 3 RBSU settings
RBSU setting
Advanced Options
Advanced Options
(HP D2D4312 only)
Power Management
Options
4. Change the BIOS ID, as shown in the following table.
Table 4 BIOS IDs for Gen2e products
Model
D2D2502i
D2D2504i
D2D4106i
D2D4106fc
D2D41 12
D2D4312
5. Exit RBSU and add the iLO2 license.
a. Log on to the iLO2 GUI.
b. Select the Administration Tab.
c. Select Licensing and enter the recorded licence key in the section marked Enter License
Activation Key.
6. HP D2D4312 only: Add the SAAP license for the integral P410i RAID card.
a. Reboot the system.
b. During the POST screen, when advised, hit any key to see further messages.
c. Enter the Smart Array POST ORCA utility by pressing [F8] when advised during the POST
messages.
d. Select the Manage Licenses option in the Smart Array menu, and then select Install Licenses.
e. Enter the licence key previously noted.
Sub-setting Sub-sub-setting
Advanced Memory Speed with
Performance Tuning 2 DIMMs per
Options Channel
Service Options Product Id (ignore
warning displayed)
Thermal Configuration
HP Power Profile
HP Power Regulator
(under Storage — Disk Storage Systems — Disk
Current
1066 MHz
Maximum
M/B default
Optimal Cooling
Balanced Power and
Performance
HP Dynamic Power
Savings Mode
BIOS ID number
678056–B21
678057–B21
678058–B21
678059–B21
678060–B21
678061–B21
After replacing the motherboard
Change to...
1333 MHz Maximum
Appropriate Product
ID for G2 shown in
table below
Increased Cooling
Maximum
Performance
HP Static High
Performance Mode
15