NEC MultiSync LCD4020 User Manual page 31

PAL-60
SCAN MODE* Some video formats may require different scanning modes in order to best display the image.
HDMI, DVD/HD, VIDEO, TV inputs only
OVER SCAN Image size is larger than what can be displayed. The image edge will appear cropped.
Approximately 95% of the image will be shown on the screen.
UNDER SCAN Image size stays within the display area. The whole image is displayed on the screen.
ADVANCED OPTION Resets the following settings within the ADVANCED OPTION menu back to factory setting:
RESET INPUT DETECT, LONG CABLE ON/OFF, LONG CABLE MANUAL, DVI MODE, SCAN
CONVERSION, S-VIDEO MODE, SCAN MODE.
FACTORY RESET Resets OSD options back to factory settings EXCEPT FOR: CHANGE SECURITY PASSWORD
and SECURITY PASSWORD.
PICTURE MODE
*1:BRIGHTNESS
*2: CONTRAST
*3: SHARPNESS
*4: BLACK LEVEL
*5: TINT
*6: COLOR
*7: COLOR TEMPERATURE
*8: COLOR CONTROL
*9: GAMMA SELECTION
*10: ADAPTIVE CONTRAST
NOTE: When connecting to a TV tuner (For U.S.), refer to page 30.
When connecting to a TV tuner (For Europe), refer to page 32.
*: The product you purchased may not have this feature.
INPUT: HDMI, DVD/HD, VIDEO, S-VIDEO
HIGHBRIGHT STANDARD
100 75
50 50
50 (DVD/HD, HDMI) 50 (DVD/HD, HDMI)
60 (VIDEO,S-VIDEO) 60 (VIDEO, S-VIDEO) 60 (VIDEO, S-VIDEO)
50 50
50 50
50 (DVD/HD,HDMI) 50 (DVD/HD,HDMI)
60 (VIDEO,S-VIDEO) 60 (VIDEO,S-VIDEO)
10000K 10000K
- -
S-GAMMA 2.4
MID OFF
CINEMA HIGHBRIGHT
80
50
50 (DVD/HD, HDMI)
50
50
50 (DVD/HD,HDMI)
60 (VIDEO,S-VIDEO)
10000K
- 0 (CENTER)
S-GAMMA
OFF
English-29
OVER SCAN
INPUT: DVI, VGA, RGB/HV
STANDARD
100 75
50 50
50 50
50 50
- -
- -
10000K 10000K
0 (CENTER)
NATIVE NATIVE
- -
-
-
sRGB
100
-
50
-
-
-
-
-
-
-