Pip; Osd - NEC MultiSync LCD4020 User Manual

PIP

KEEP PIP MODE*
PIP MODE*
OFF
PIP
POP
SIDE BY SIDE (ASPECT) SIDE BY SIDE ASPECT
SIDE BY SIDE (FULL)
PIP SIZE
SMALL
MIDDLE
LARGE
PIP POSITION
TEXT TICKER
PIP RESET

OSD

LANGUAGE
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
SVENSKA
Русский
OSD TURN OFF
OSD POSITION
UP
DOWN
LEFT
RIGHT
INFORMATION OSD
MONITOR INFORMATION Monitor Information.
OSD TRANSPARENCY
OFF
TYPE1
TYPE2
OSD RESET
*: The product you purchased may not have this feature.
Allows the monitor to remain in "PIP" mode after powering off. When Power is returned,
PIP appears without having to enter the OSD.
Picture-in-Picture
OFF
PIP
POP
SIDE BY SIDE FULL
Selects the size of the sub-picture used in Picture-in-Picture (PIP) mode.
Determines where the PIP appears on the screen.
Allow text insertion within main screen.
Resets PIP options back to factory settings.
Select the language used by the OSD.
Turns off the OSD after a period of inactivity. The preset choices are 10-240 seconds.
Determines the location where the OSD appears on the screen.
Selects whether the information OSD is displayed or not. The information OSD will be
displayed when the input signal or source changes. The information OSD will also give a
warning when there is no-signal or the signal is out-of range.
An interval between 3 to 10 seconds for the Information OSD to appear is available.
Set the transparency level of the OSD.
Resets the following settings within the OSD menu back to factory setting:
OSD TURN OFF, OSD POSITION, INFORMATION OSD, OSD TRANSPARENCY.
English-26
OFF
OFF
LARGE
X = 95, Y = 92
OFF
-
English
30 Sec.
X = 128, Y = 225
ON, 3 Sec.
-
TYPE2
-