Download  Print this page

NEC Integrated Protective Glass Installation Manual

Protective glass
Hide thumbs
   

Advertisement

LCD4620
1.1)
1.2)
2.1)
rear cover
Figure 2.1
Remove BRACKET PWB IR
Figure 2.2
LCD4020
LCD5220
Figure 1
Remove the three screws
3.1)
Paste TAPE-1 on this area
Figure 3.1
3.2)
Figure 3.3
3.3)
BRACKET PWB IR
Adjust the position of BRACKET
PWB IR to the lower hole.
Figure 3.5
Do not paste TAPE-1
on this area. This note
refers to all 4 corners.
60mm
60mm
Figure 3.2
Align edge
Figure 3.4

Advertisement

Table of Contents
loading

  Related Manuals for NEC Integrated Protective Glass

  Summary of Contents for NEC Integrated Protective Glass

  • Page 1 LCD4620 1.1) 1.2) Figure 1 2.1) Remove the three screws rear cover Figure 2.1 Remove BRACKET PWB IR Figure 2.2 LCD4020 LCD5220 3.1) Paste TAPE-1 on this area Figure 3.1 3.2) Figure 3.3 3.3) BRACKET PWB IR Figure 3.5 Do not paste TAPE-1 on this area.
  • Page 2 4.1) Paste TAPE-2 on this area Peel paper off after pasting TAPE-2 BRACKET-4 TAPE-2 Figure 4.1 4.2) Figure 4.2 Adjust the position of BRACKET BRACKET-4 to the lower hole. PWB IR to the upper hole. Figure 4.3 Position A Figure 4.4 5.1) Figure 5.1 Figure 5.3...

This manual is also suitable for:

Multisync lcd4020Multisync lcd4620Multisync lcd5220