Page of 9
   

Advertising

LCD5220 Installation Guide
52" LCD Display
Contents:
Tilt Angle and Rotation
Ventilation Requirements
Front, Top & Right Side
Rear & Bottom
Display Dimensions w/Optional Speakers and Stand
Table Top Stand Dimensions
Optional Speaker Dimensions
Dimensions optional Wall Mount
Product Description
Type:
LCD Display
Resolution:
1920 x 1080
Aspect Ratio:
16:9
FCC:
Class B
Power Consumption: 270W (max)
Notes
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to
be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally to
fill the screen using the menus (see "Aspect Modes" in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Tilt Angle and Rotation
Below are the maximum angles that the monitor can be tilted in the landscape position only.
Landscape 20deg
www.necdisplay.com
NEC Display Solutions of America, Inc.
Page 1
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Screen Surface: Anti-Reflective
Dimensions:
Weight:
BTU's:
Max. 20 deg
LCD5220
47.2"(W) x 27.4"(H) x 5.8"(D)
97.7 lbs
921 BTU/hour
Page 1 of 9
Rev 1.1

   Related Manuals for NEC LCD5220-AV - MultiSync - 52" LCD Flat Panel Display

   Summary of Contents for NEC LCD5220-AV - MultiSync - 52" LCD Flat Panel Display

  • Page 1: Product Description

    NEC Display Solutions of America, Inc. LCD5220 Installation Guide 52” LCD Display Rev 1.1 Contents: Product Description and Notes Page 1 Tilt Angle and Rotation Page 1 Ventilation Requirements Page 2 Display Dimensions Front, Top & Right Side Page 3 Rear &...

  • Page 2

    NOTE: The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and recommendations.

  • Page 3: Display Dimensions

    NEC Display Solutions of America, Inc. LCD5220 Installation Guide 52” LCD Display Rev 1.1 Display dimensions (PANEL DISPLAY AREA) www.necdisplay.com LCD5220 Page 3 of 9...

  • Page 4

    NEC Display Solutions of America, Inc. LCD5220 Installation Guide 52” LCD Display Rev 1.1 Display dimensions (cont.) 200mm MOUNTING HOLE PATTERN 8-M6 Depth 12mm Control Panel Power Switch AC Inlet www.necdisplay.com LCD5220 Page 4 of 9...

  • Page 5

    NEC Display Solutions of America, Inc. LCD5220 Installation Guide 52” LCD Display Rev 1.1 Dimensions with optional speakers and stand www.necdisplay.com LCD5220 Page 5 of 9...

  • Page 6

    NEC Display Solutions of America, Inc. LCD5220 Installation Guide 52” LCD Display Rev 1.1 Table Top Stand Dimensions (ST-5220) Table Top Stand ST-5220 www.necdisplay.com LCD5220 Page 6 of 9...

  • Page 7

    NEC Display Solutions of America, Inc. LCD5220 Installation Guide 52” LCD Display Rev 1.1 Optional Speaker Dimensions (SP-5220) Optional Speakers SP-5220 INPUT TERMINAL www.necdisplay.com LCD5220 Page 7 of 9...

  • Page 8

    NEC Display Solutions of America, Inc. LCD5220 Installation Guide 52” LCD Display Rev 1.1 Dimensions with optional Wall Mount Kit (WMK3260-L) www.necdisplay.com LCD5220 Page 8 of 9...

  • Page 9: Control Codes, Cable Connection

    01 30 41 30 45 30 41 02 30 30 30 32 30 30 30 31 03 77 0D AUTO 01 30 41 30 45 30 41 02 30 30 30 32 30 30 30 32 03 74 0D NOTE: Contact your NEC rep for codes not listed. NOTE: Use a cross/reverse/null modem cable. Cable Connection...

Comments to this Manuals

Symbols: 0
Latest comments: