Installing A New Blade - Redsail C series User Manual

Installing a New Blade

Set Brass Ring on
Blade Carriage to
the fully down
position
Loosen the locking knob
on the carriage arm.
version number:
Remove the Insert the blade
protective cover into the top of the
from a new Blade carriage.
blade.
Place Blade carriage into the
carriage arm.
Redsail Tech Co., Ltd
www.hflaser.com
1.1.1.140508_PRO
Adjust the
carriage cap
until the blade
is protruding
approximately
th
1/64 of an
inch.
Tighten the locking knob on
the carriage arm.
Adjust the
Brass Ring
until it fits
snug against
the Cap. This
will help keep
the cap in
place during
operation
21