Installing The Pen Carriage - Redsail C series User Manual

Installing the Pen Carriage

Most new users will benefit from practice "cutting" with the supplied pen
carriage until they are comfortable with normal operations of the cutter
and cutting software.
Your Pen Carriage should come assembled and appear as it does in this
image. If it does not, please refer to the pen replacement section below
for assembly instructions.
To install the pen carriage:
Loosen the locking knob
on the carriage arm.
version number:
Drop the pen attachment
into place in the slot of
the carriage arm.
Redsail Tech Co., Ltd
www.hflaser.com
1.1.1.140508_PRO
Tighten the locking knob
on the carriage arm.
19