Redsail C series User Manual page 17

version number: 1.1.1.140508_PRO
If Using the USB Cable to connect your cutter to a Computer:
You will need to install drivers for the USB connection to work properly. These
drivers can either be obtained from the supplied drivers disc or downloaded from the
support website (in the downloads section of www.hflaser.com).
If you need download the drivers from our website, then please reading the following
guidance:
There are two optional USB port for the cutting plotter. You can check it on " Device
Manager" of your computer .
If the USB port shows: FT232R USB UART, then you can download the USB
Driver-FTDI.
If the USB port shows: USB2.0-Serial, then you can download the USB
Driver-CH341SER.
Windows XP Users:
1. Insert the driver disc or download (and unzip if necessary) drivers to your system.
2. Connect the USB Cable to your computer and your cutter. The Found New
Hardware wizard will appear.
3. When asked, "Can Windows connect to Windows Update to search for software?"
select "No, not this time" and click next.
4. When asked, "What do you want the wizard to do?" select "Install from a list or
specific location (Advanced)" and click next.
5. Choose the "Search for the best driver in these locations" radio button and check
the "Include this location in the search" checkbox. Now type (or browse to find) the
location of the downloaded drivers/inserted drivers disc and click next.
6. When the wizard is complete, click the Finish button.
7. The Found New Hardware wizard should appear again. When it does, follow steps
3-6 again for the second driver.
Windows Vista Users:
If you want to use downloaded drivers, download them before starting the install
process.
1. Connect the USB Cable to your computer and your cutter. Then Found New
Hardware wizard will appear.
2. When told that "Windows needs to install driver software..." select "Locate and
install driver software (recommended)".
3. If Windows finds and downloads your needed drivers then the process is complete.
Repeat the previous steps again for the second needed driver. If Windows does not
find and download the needed drivers proceed to the next step.
Redsail Tech Co., Ltd
17
www.hflaser.com