Wires Connection Description - Caliber RDD 571BT Instruction Manual

7

1.7 Wires Connection Description

The Description of the Input/Output Interface of the Rear Cabinet
Radio Antenna
1. Parking wire must be connected. And the parking brake must be engaged in order for the monitor to work.
2. Use the clip end of the Ground Wire provided by manufacturer to connect Mounting Screw, using the other
end of the Ground Wire to connect the negative pole of the power source. Otherwise, the video on screen
maybe flashes.
Description of the Wiring Diagram for Socket 1
ISO CONNECTOR
YELLOW
MEMORY B+
BLACK(GND)
RED
IGNITION SWITCH
BLUE AUTO ANT
+
FRONT
LEFT
SP
+
REAR
NOTES:
1. Only speakers with 4 ohms impedance may be used.
2. Ensure that the blue auto antenna cable does not make contact
with any ground connection.
Description of the Wiring Diagram for Socket 2
REAR VIEW CAMERA
YELLOW
YELLOW
YELLOW
Fixing Screw Bolt
Wiring Connecting Socket 2 Wiring Connecting Socket 1
FUSED
FILTER
BOX 1A
& 10 A
FUSES
RCA OUTPUT
WHITE
WHITE / BLACK GRAY / BLACK
GREEN VIOLET
VIOLET / BLACK
GREEN / BLACK
REVERSAL LINE
BLACK
PARKING LINE
VIDEO LINE OUT
BT Microphone in
WIRING CONNECTING SOCKET 1
WIRING CONNECTING PLUG 1
SUBWOOFER OUTPUT
GREEN
GRAY RED(R)
WHITE(L)
+
GRAY
FRONT
RIGHT
SP
+
REAR
WIRING CONNECTING SOCKET 2
WIRING CONNECTING PLUG 2
WHITE
GREEN