Caliber RDD 571BT Instruction Manual page 26

25
4.23.5 SPEAKER SETUP
DOWNMIX
This is for selecting your desired sound effect
when there is not central speaker and subwoofer.
There are 3 mode: LT/RT, STEREO, VSS.
LT/RT: When playing a disc with PRO LOGIC
so it will output audio signal with vivid theatre effect.
STEREO: If you choose the item, when outputting
channels, it will output the left and right channels of signal ;
when outputting audio signal with 2 channels, it will output
the common 2 channels of stereo signal.
VSS: If you choose the item, when playing a disc recorded with 5.1 channels,
the main channel speakers can output audio signal with VSS effect.
4.23.6 DIGITAL SETUP
.
DYNAMIC RANGE
After selecting the compression mode of LINE OUT, set the item, so you can
adjust the linear compression ratio. If you set it to be FULL, the Peak-to-Peak
value of the audio signal is the minimum; if you set it to be OFF, the Peak-to-
Peak value is the maximum.
DUAL MONO
This is for selecting a desired audio output mode for left and right signals.
It is mainly for Karaoke of Ac3. There are 4 modes in all as follows:
STEREO, MONO L, MONO R, MIX MONO.
stereo effect, choose the item,
audio signal with 5.1