Table of Contents
Advertisement
21
4.19 Program Playback
It allows you to enter the order in which you want some chapters/tracks in
DVD/VCD/MP3/WMA/CD to play.
1 During playback, press the PROG button to enter a program interface as
follows:
2 Use the direction buttons to move cursor onto the desired place for inputting
the sequence number.
3 Use the number button to input desired sequence number of title/chapter/
track with desired sequence.
4 Use the direction button to move cursor onto Play item, then press the OK
button to play the programmed titles/chapters/tracks in programmed order;
only pressing the PLAY button also can play the programmed titles/chapters
/tracks in programmed order.
*
To exit program playback, firstly press the STOP button, then press the PLAY
button to enter sequence playback; or press the PROG button twice again.
*
To remove the all programmed sequence numbers, move the cursor onto
Clear item, then press the OK button.
*
To change the programmed sequence, move the cursor onto the item you
want to change, input the desired sequence number.
*
During VCD playback, if it is in PBC ON mode, at the same time of entering
the state of program playback, it turns off PBC mode.
4.20 Playback IMAGE files
1. The root menu is displayed on the monitor when beginning to switch on IMAGE
mode.
2. Tap the icon
file,finally tap the file you desired to playback.
Note: After open the FOLDER, you can also use the direction button
the remote control to turn to next or previous page, then use the button
to select the file.
Finally press OK button to playback.
to turn to FOLDER interface,then tap the file name to open the
or
on
or
Hide quick links:
Advertisement
Table of Contents
