Braun EE 1670 Manual page 11

1
Select the tweezer grip:
+ full tweezer grip
for normal to thicker hair
– reduced tweezer grip
for finer hair
2
Slide up the switch lock to release
the switch. To avoid accidentally
switching on the appliance, e.g.
when travelling, push the switch
lock down as far as it will go.
Before starting off, make sure that
the epilator head is thoroughly
cleaned and disinfected. Your skin
must be dry and free from grease
or cream.
3
Switching on
0 = Off
1 = For gentle epilation
2 = For normal epilation
3 = For high-speed epilation
4
Rub your skin to lift short hairs.
Apply the Silk·épil at right angles
(90°) against your skin. For best
epilation results, make sure that
the soothing attachment wheels
always keep in contact with the
skin surface. Pressing gently,
guide it slowly against the hair
growth. Underarm this means
guiding the appliance in different
directions. Do not press too hard.
On bony parts, we recommend
to use a lower switch setting.
5
When epilating behind the knee,
keep the leg stretched out
straight; when epilating under-
arm, your arm should be raised
up.
12
Cleaning the epilator head
6
After each use, switch off and
unplug the appliance. Take off
the soothing attachment and
brush out the rows of wheels.
7
Thoroughly clean the tweezer
element with the cleaning brush
and also disinfect it with a few
drops of Silk·épil cleaning fluid
or alcohol. While cleaning, you
can turn the tweezer element
manually. To take off the epilator
head, press the two release bars
on the front and back and pull
it off.
8
Give the top of the housing a
quick clean with the brush.
Put back on the epilator head.