Components; Accessories; Location Identification Plate - Vermeiren 708D Instruction Manual

The wheelchair complies to the requirements set up in:
ISO 7176-8: Requirements and test methods for static, impact and fatigue strengths.
EN 1021-1: Assessment of the ignitability of upholstered furniture - Ignition source
smouldering cigarette
EN 1021-2: Assessment of the ignitability of upholstered furniture - Ignition source match
flame equivalent
ISO 7176-19: Wheeled mobility devices for use as seats in motor vehicles.
1.3

Components

1.4

Accessories

The following accessories are available for the 708D:

Armrests (B02, B03, B05, B66)

Footrests / Legrests (B06, B07, B08, BZ7, BZ8, BZ9, BZ10, BK7, BL7, BA6, BK6)

Table (B12)

Crutch holder (B31)

Backrest (L14, L24, L44)

Anterior pelvic belt (B58) for mounting over the backrest tube

Anti-tipping device (B78) for mounting on the bottom back frame

Drum brakes for the attendant (B74) for mounting on the push handgrips

Transit wheelchair (T30)

Moving the axle back (AMP)

Quick release (B80)

Lowering seat height to 470 mm (S)
1.5

Location identification plate

1 = Cross
2 = Handgrips
3 = Backrest
4 = Armpads
5 = Armrests
6 = Driving wheels (rear wheels)
7 = Hand rims
8 = Brakes
9 = Tip cap
10 = Steering wheels (Front wheels)
11 = Seat
12 = Footrests
1 = Taxi hooks
2 = Identification plate
3 = Name 708D
Page 5
708D
2015-03