Rear Controls; Mode Select; Image Lock - NEC MultiSync LCD300 User Manual

Controls E - 9

Rear Controls

SYNC mode select switch
Reserve

Mode Select

High Resolution Select Switch: Switches are set based on supported
input values as described in Appendix 2.
SYNC Mode Select Switch: Allows selection between standard
separate and composite SYNC modes (up/ON) and Sync on Green
(down/OFF) priority mode.
Reserve: This switch must remain in the off position.
Control
Display position (left/right, up/down): Horizontal/Vertical display
adjustment. The display position is adjustable to the right or left and up or
down by one pixel by pushing the button one time. The image is adjustable
by multiple pixels in each direction by keeping constant pressure on the
button.

Image Lock

Image lock: Adjustment for dot clock sampling. Jitter or flicker noise
may be eliminated by pushing each button in (+) or ( – ) direction.
Reset
Reset: When pressed for over 5 seconds, this button resets the display
position to the factory setting.