Recommended Use - NEC MultiSync LCD300 User Manual

Recommended Use

Recommended Use
For optimum performance, please note the following when setting up
and using the MultiSync LCD
The optimum monitor position is facing away from direct
sunlight.
Allow adequate ventilation around the monitor so that heat
can properly dissipate.
Do not place any heavy objects on the power cord. Damage
to the cord may cause shock or fire.
Use the monitor in a clean and dry area.
Handle with care when transporting. Save packaging for
transporting.
When operating the MultiSync LCD
240V worldwide power supply, use a power supply cord
that matches the power supply voltage of the AC power
outlet being used. The power supply cord you use shall be
employed one of the type H05VV-F with the earth pin,
which must have been approved by and comply with the
safety standards of your country.
The power cable connector is the primary means of detaching
the system from the power supply. The monitor should be in-
stalled close to a power outlet which is easily accessible.
Clean the LCD monitor surface with a lint-free, non-abrasive
cloth. Avoid using any cleaning solution, glass cleaner or tissue
paper.
For optimum performance, allow 20 minutes for warm-up.
Avoid displaying fixed patterns on the monitor for extremely
long periods of the time to avoid after-image effects.
Avoid applying pressure to the LCD monitor surface.
color monitor:
300
E - 5
with its AC125-
300