Black & Decker LPP120 Instruction Manual page 5

Some examples ofthese chemicals are:
bead from lead-based paints,
crystalline silica f rom bricks a nd cement andother masonry
products, and
arsenic and chromium from chemically-treated lumber. (CCA)
Your r isk from these exposures varies, depending onhow often you
dothis type ofwork. Toreduce y our e xposure tothese chemicals:
work inawell v entilated area, a nd work with approved safety
equipment, such as those dust masks that are specially designed
to filter out microscopic particles.
• Avoid prolonged contact with dust from power sanding,
sawing, grinding, drilling, and other construction activities.
Wear protective clothing and wash exposed areas with soap
and water. Allowing dust to get into your mouth, eyes, or lay on the
skin may promote absorption of harmful chemicals.
ZLWARNING:
Use of this tool can generate and/or disburse
dust, which may cause serious and permanent respiratory or
other injury. Always use NIOSH/OSHA approved respiratory
protection appropriate for the dust exposure. Direct particles away
from face and body.
SAVE THESEINSTRUCTIONS
The label on your tool may include the following symbols.
V ............... volts
Hz ............. hertz
min ............ minutes
- - -. ......... direct current
[] .............. Class II Construction
z_ ............. safety alert symbol
A .................... amperes
W ................... watts
"_ .................. alternating current
no ................... no load speed
.................... earthing terminal
.../min ............. revolutions or
per minute
Before using your Pole Saw familiarize yourself with all operating and
safety features.
A. Handle Module
B. Center Extension
C. Saw Head Module
1. Trigger Switch
2. Lock Button
3. Battery
4. Foam Gripper
5. Threaded Pole
6. Threaded Sleeve
7. Center Extension Pole
8. Sprocket Cover (other side)
9. Allen Head Screws (other side)
10. Guide Bar
11. Saw Chain
12. Scabbard
13. Allen Wrench
14. Oil Bottle