Black & Decker GPC1800L Original Instructions Manual
Black & Decker GPC1800L Original Instructions Manual

Black & Decker GPC1800L Original Instructions Manual

Black & decker cordless pole pruner user manual

Advertisement

GPC1800L

Advertisement

Table of Contents
loading

Summary of Contents for Black & Decker GPC1800L

  • Page 1 GPC1800L...
  • Page 4: Intended Use

    ENGLISH (Original instructions) Intended use Your Black & Decker cordless pole pruner has been designed for pruning trees. This tool is intended for consumer use only. Your Black & Decker charger has been designed for charging Black & Decker batteries of the type supplied with this tool.
  • Page 5 Power tool use and care • Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. • Do not use the power tool if the switch does not turn it on and off.
  • Page 6 ENGLISH (Original instructions) • Do not attempt to cut a branch when the diameter of the branch exceeds the cutting length of the tool. • Always remove the battery from the tool and place the chain cover over the chain when storing or transporting the tool.
  • Page 7: Warning Symbols

    Warning symbols The following warning symbols are found on the tool: Warning! To reduce the risk of injury, the user must read the instruction manual. Do not use the tool in wet conditions or expose it to rain. Always wear head and eye protection. Wear non-slip safety footwear.
  • Page 8 ENGLISH (Original instructions) The charger automatically shuts off if the ambient temperature becomes too high. As soon as the ambient temperature has cooled down, the charger will resume operating. +40ºC Charge only at ambient temperatures +10ºC between 10 °C and 40 °C. Electrical safety Your charger is double insulated;...
  • Page 9: Cleaning, Maintenance And Storage

    After several charge and discharge cycles, the battery will attain full capacity. The battery may become warm while charging; this is normal and does not indicate a problem. Warning! Do not charge the battery at ambi- ent temperatures below 10 °C or above 40 °C. Recommended charging temperature: approx.
  • Page 10: Protecting The Environment

    ENGLISH (Original instructions) Regularly clean the motor houseing using a damp cloth. Do not use any abrasive or solvent-based cleaner. Regularly open the chuck and tap it to remove any dust from the interior (when fitted). After use and before storage •...
  • Page 11: Technical Data

    EN ISO 11203: LPA = 78 dB(A), uncertainty (K) = 3 dB(A) Vibration total values (triax vector sum) deter- mined according to EN 60745 Vibration emission value ah= Cutting wood Uncertainty K= ENGLISH GPC1800L (H1) A1518L 0.45 9053954* <2.5 <1.5...
  • Page 12 ENGLISH (Original instructions) EC - Declaration of Conformity MACHINERY DIRECTIVE GPC1800L Black & Decker declares that these products described under “technical data” are in compliance with: 2006/42/EC EN60745-1, These products also comply with Directive 2004/108/EC. For more information, please contact Black &...
  • Page 15 ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.
  • Page 16 Australia Black & Decker (Australia) Pty. Ltd. 20 Fletcher Road, Mooroolbark, Victoria, 3138 Tel. 03-8720 5100 Fax 03-9727 5940 New Zealand Black & Decker 5 Te Apunga Place Mt Wellington Auckland 1060 Tel. +64 9 259 1133 Fax +64 9 259 1122 United Kingdom Black &...

Table of Contents

Save PDF