Download Print this page

Black & Decker PS7525 Original Instructions Manual

Pole pruner
Hide thumbs




  Summary of Contents for Black & Decker PS7525

  • Page 1 PS7525...
  • Page 5: Safety Instructions

    (Original instructions) ENGLISH Intended use a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a Your BLACK+DECKER pole pruner has been designed for power tool while you are tired or under the influence pruning trees.
  • Page 6 ENGLISH (Original instructions) e. Maintain power tools. Check for misalignment or Keep proper footing and balance at all times. binding of moving parts, breakage of parts and any Hold the tool firmly with both hands when the motor is other condition that may affect the power tools running.
  • Page 7 (Original instructions) ENGLISH Follow the manufacturer's sharpening and mainte- When assessing vibration exposure to determine safety nance instructions for the saw chain. Decreasing the measures required by 2002/44/EC to protect persons regularly depth gauge height can lead to increased kickback. using power tools in employment, an estimation of vibration Striking metal, cement or any other hard material near the exposure should consider, the actual conditions of use and the...
  • Page 8: Electrical Safety

    ENGLISH (Original instructions) Electrical safety Assembly This tool is double insulated; therefore no earth wire is Warning!Before assembly, make sure that the required. Always check that the power supply corresponds to the voltage on the rating plate. appliance is switched off and unplugged. If the supply cord is damaged, it must be replaced by the Warning!Always wear protective gloves when manufacturer or an authorised Black &...
  • Page 9 (Original instructions) ENGLISH Once chain tension is correct, tighten the locking nut (8) in Consider access to the tree limb. the sprocket cover (7). Make sure the tool is running at full speed before making Refit the Locking Nut cap (13). a cut.
  • Page 10 Technical data Once the chain tension is correct, tighten the chain locking nut (8). PS7525 (Type 1) Warning! When the saw chain is new, check the tension frequently during the first two hours of use as a new saw chain Voltage stretches slightly.
  • Page 11 (Original instructions) ENGLISH Guarantee Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
  • Page 12 Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place +64 9 259 1122 Mt Wellington Aukland 1060 United Kingdom &...