Gigaset SL450 Owner's Manual page 61

Activating/deactivating Auto Answer
When set to Auto Answer, the handset accepts an incoming call as soon as it is removed from the
charging cradle.
¤
. . . use
Change ( = on)
Regardless of the Auto Answer setting, the connection ends as soon as you place the handset
back in the charging cradle. Exception: Press and hold the handsfree key
2 seconds while placing the handset in the charging cradle.
Changing the earpiece and handsfree volume
You can set the volume of the earpiece and speaker at 5 levels independently of each other.
Changes are only saved permanently in Profile Personal.
During a conversation
¤
Handset Volume
Without saving, the setting is automatically saved after around 3 seconds.
In idle status
¤
. . . use
Volume OK . . . then
For the earpiece:
For the speaker:
Save settings:
Earpiece and handsfree profile
Select a profile for the earpiece and handsfree mode in order to adapt the telephone as much
as possible to the surroundings. Check which is the most comfortable profile for you and your
caller.
¤
. . . use
Akustikprofile
select profile Select (
Earpiece Profiles: High or Low (default setting)
Handsfree Profiles: Profile 1 (default setting) . . . Profile 4
to select Settings
. . . use to select volume
to select Settings
¤
Earpiece: . . . use
¤
Speaker
¤
Save
to select Settings
Earpiece Profiles / Handsfree Profiles
= selected)
OK Telephony
Save . . . the setting is saved
OK Audio Settings
to set the volume
. . . use to set the volume
OK Audio Settings
Handset
OK Auto Answer
for a further
OK Handset
OK
OK . . . use to
59