Brother FAX-2480C User Manual page 96

Receiving Faxes
Difficulty
Cannot receive a fax
Sending Faxes
Difficulty
Cannot send a fax
Transmission Verification Report
says 'Result:NG' or
'Result:ERROR'.
Poor fax send quality.
Vertical black lines when sending.
Suggestions
Check all line cord connections.
Make sure the machine is in the correct receiving mode for your setup. (See
Receive modes on page 31.)
If you often have interference on the phone line, try changing the menu setting of
Compatibility to Basic. (See Compatibility on page 95.)
Suggestions
Check all line cord connections.
Make sure that the Fax
on page 24.)
Ask the other party to check that the receiving machine has paper.
Print the Transmission Verification Report and check for an error. (See Reports
on page 59.)
There is probably temporary noise or static on the line. Try sending the fax again.
If you send a PC FAX message and get 'Result:NG' on the Transmission
Verification Report, your machine may be out of memory. If the problem continues,
ask the telephone company to check your phone line.
If you often get transmission errors due to possible interference on the phone line,
try changing the menu setting of Compatibility to Basic. (See Compatibility
on page 95.)
Try changing your resolution to Fine or S.Fine. Make a copy to check your
machine's scanner operation. If the copy quality is not good, clean the scanner.
(See Cleaning the scanner on page 98.)
If the copy you made shows the same problem, clean the scanner. (See Cleaning
the scanner on page 98.)
Troubleshooting and Routine Maintenance
key is illuminated. (See Entering Fax mode
87