Introduction - Primera CX1000 Operator's Manual

TOC
Section 1: Introduction
Thank you for purchasing the CX1000 Color Label Printer. The CX1000 Color Label Printer may
also be labeled as the CX1000 Color Label Press or as the Color Label Press in PTPrint software, the
status monitor software or the printer driver. Hereafter in the manual the CX1000 Color Label
Printer will be referred to as the "CX1000". The laser printer portion will be referred to as the
"printer". The unwinder and rewinder unit will be referred to as the "base". Toner and label stock
will be referred to as "media".
This manual is one of many sources of information for this product. If you have problems or
questions please consult one of these resources:
• Tech Support Phone: 763-475-6979
• Tech Support Email: www.primera.com/contactsupport
• Online Knowledgebase: www.primera.com/kb
Figure 1-1.
Cut/Stop Button
Cutter
Important Note on Label Press Operating Environment! It is strongly recommended that the
CX1000 Color Label Press is operated in an air-conditioned, humidity controlled, smoke free, pet free
environment.
Eyemark Sensor
Unwinder Feeder Door Unwinder
Dancer
Arm
Label Guide Printer
Control Panel
INDEX
Rewinder Label Guide Discs
Tension Knob
Rewinder
Dancer
Arm

Introduction 1