Operating In Destination Search Mode - Navigon PNA 2110 User Manual

User's manual NAVIGON 2100 | 2110
9.4.1

Operating in Destination search mode

1. Tap on the point to which you wish to navigate.
The destination that you have selected appears under the cross
hairs.
The geographical coordinates of the destination and the
corresponding address are shown in the bottom third of the screen.
2. Tap the
Buttons with various functions will appear.
Take Me There: Begins navigation to the selected point. If you are currently
navigating, navigation will be aborted.
Interim Destination: Sets the selected point as an interim destination. The
navigation system will first guide you to this interim destination.
Afterwards, you may simply continue navigation to your original
destination.
This function is only active during navigation.
Set as Destination: Adds the selected point as the last point in the route plan. If
no route plan was open, the selected point will become the first point in
a new route plan.
Save: Opens the S
under which the selected point will be stored in the F
For more detailed information, please refer to chapter "Saving a
destination" on page 31.
Search Nearby: Opens the POI N
destinations near the specified point. (See "Special destinations nearby"
on page 25)
Tap the
►
search mode. You will be returned to the window from which you
started this mode.
Tap the
►
are currently navigating, you will be prompted to confirm your
decision to quit navigation.
- 44 -
(OK) buttton.
D
AVE ESTINATION AS
EARBY
(Destination search) button to quit the Destination
(Back) button to return to the M
... window. You can enter a name
window. Here you can search for
list.
AVOURITES
. If you
AIN WINDOW
Working with the map