Managing Routes; Saving Routes; Loading Routes; Navigation - Navigon PNA 2110 User Manual

User's manual NAVIGON 2100 | 2110
Route Point Down: Moves the selected route point backwards.
(Example: route point 2 becomes route point 3).
Delete: Deletes the selected route point. A dialog window prompts
you to confirm deletion.
7.2

Managing routes

You can save each planned route under a particular name.
Note: Only the start point and route points will be saved, not, however,
the calculated route. If you load a route that has been saved, it must be
recalculated before navigation can begin.
You can load, rename or delete stored routes.
7.2.1

Saving routes

The R
point and at least one route point.
1. Tap on Options > Save Route.
2. Enter a name for the route.
3. Tap the Save button.
The destination is now saved to the S
window closes.
7.2.2

Loading routes

1. Tap on Options > Saved Routes.
2. Tap the route that you want to load.
3. Tap the Load Route button.
The R
route points of the loaded route have been entered.
7.3

Navigation

The route must be calculated first. You may then begin navigation or
just simulate it.
7.3.1

Calculating and displaying routes

It is possible to calculate and display a planned route on the map even
without GPS reception in order to get an impression of the journey.
- 34 -
P window is open. You have entered the starting
OUTE LANNING
P
OUTE LANNING
AVED
window opens. The starting point and the
R list. The dialog
OUTES
Routes with stages