Preparing Navigon 2100 | 2110 For Use; Before Using For The First Time - Navigon PNA 2110 User Manual

5
6
7
2.3

Preparing NAVIGON 2100 | 2110 for use

2.3.1

Before using for the first time

Charging the rechargeable battery
Included in delivery of the NAVIGON 2100 | 2110 is a car charger cable
with which power can be supplied to the navigation device via the
vehicle's cigarette lighter.
The car charger cable is connected to the NAVIGON 2100 | 2110 via
the mini-USB-socket
Caution! The car charger cable is to be connected to cigarette lighters
with an operating voltage of 12V only.
Connect the car charger cable to the navigation device and the
►
vehicle's cigarette lighter.
The LED of the NAVIGON 2100 | 2110 lights orange during charging.
The LED lights green when the NAVIGON 2100 | 2110 is fully charged.
Note: It takes approx. 2-3 hours to charge the device when the battery
is flat.
A fully charged battery enables approx. 3 hours of use.
Inserting a memory card
Insert the memory card provided into the device (see image). Press
►
the card into the device until it locks into place.
Before you begin
Slot for SD-memory card
On/Off/Standby
Connection for external GPS antenna
on the bottom of the device.
User's manual NAVIGON 2100 | 2110
- 11 -