Managing Destinations; Saving A Destination; Defining A Destination As Home Address - Navigon PNA 2110 User Manual

No GPS reception
If the received GPS signal is insufficient, the following message will
appear: "GPS reception is currently not sufficient. Navigation starts
automatically as soon as GPS reception is OK again."
You have the following options:
Wait until GPS reception is sufficient for determining position, the
►
route will be recalculated and you can begin navigation.
Tap the Cancel button. The M
►
is saved in the L
Tap the Demo button. The route will be calculated using the centre
►
of the specified location as starting point. Subsequently, navigation
of the route will be simulated.
Tap
6

Managing Destinations

Every destination that you enter, and the destinations from the L
D
ESTINATIONS
sense if you frequently navigate to a particular destination.
6.1

Saving a destination

1. Enter a destination as described in "Specifying a new destination"
on page 23. Do not tap the Start Navigation button!
2. Tap on Options > Save Destination.
- OR –
1. Select a destination from the L
chapter "Last Destinations" on page 28. Do not tap the Start
Navigation button!
2. Tap on Options > Save as Favourite.
3. Enter a name for the destination.
4. If you want to define the destination as your home address, tap on
the
black.
5. Tap the Save button.
6.2

Defining a destination as home address

Only one destination from the F
home address.
Managing Destinations
D
AST ESTINATIONS
(Back) to end the demonstration.
list may be saved to the F
(Toggle) button so that the value Yes is highlighted in
User's manual NAVIGON 2100 | 2110
W opens. Your destination
AIN INDOW
list.
AVOURITES
D
AST ESTINATIONS
list can be defined as your
AVOURITES
AST
list. This makes
list as described in
- 31 -