Hardware Monitor Page; Load Optimal Defaults; Save Changes And Exit - PC Chips A21G User Manual

Voltage Value
This item identifies the CPU default voltage value. The value may change
depending on the CPU you installed on the motherboard.

Hardware Monitor Page

This page sets up some parameters for the hardware monitoring function of this
motherboard.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
*** System Hardware Monitor***
Vcore
+1.2VLDT
Vdimm
+5V
+12V
+5VSB
CPU FAN2 Speed
SYSTEM FAN1 Speed
CPU Temperature
SYSTEM Temperature
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help
CPU/System Temperature
These items display CPU and system temperature measurement.
FANs & Voltage Measurements
These items indicate cooling fan speeds in RPM and the various system voltage
measurements.

Load Optimal Defaults

This option opens a dialog box to ask if you are sure to install optimized
defaults or not. You select [OK], and then <Enter>, the Setup Utility loads all
default values; or select [Cancel], and then <Enter>, the Setup Utility does not
load default values.

Save Changes and Exit

Highlight this item and press <Enter> to save the changes that you have made in
the Setup Utility configuration. When the Save Changes and Exit dialog box
appears, select [OK] to save and exit, or [Cancel] to return to the main menu.
Chapter 3: BIOS Setup Utility
Hardware Monitor Setup
:1.463V
:1.248V
:2.512V
:5.026V
:12.056V
:4.961V
:4017 RPM
:0 RPM
:50°C/122°F
:31°C/87°F
F9: Optimized Defaults
27
Help Item