Atlantis_OM.qxd
06/08/2001
Scanning
1. To begin scanning the
programmed channels,
press the SCAN button.
MEM, SCAN and TRIPLE appear on
the display.
2. To stop scanning, press the SCAN
button once more. SCAN and TRIPLE
disappear from the display.
Scanning starts from the lowest to
highest channel and stops when it
finds an active channel. It remains
on that channel until the transmis-
sion ends, then resumes scanning
after a 3 second delay period.
When in the scan mode, the unit
automatically activates the Triple
Watch feature. To deactivate Triple
Watch from the scanning mode,
press and hold the 16/9/TRI button
for 2 seconds. TRIPLE disappears
from the display.
16
4:51 PM
Page 20