Appendix 2: Ip1000 Service Tool; Eeprom Reset - Canon iP1000 Simplified Service Manual

APPENDIX 2: iP1000 SERVICE TOOL

< How to use the iP1000 Service Tool (QY9-0065) >
Usage:
Supported OS:
Distribution method:
< Usage procedures >
1. Unzip iP1000tool_V100.EXE. (Double-click to unzip the file.)
2. Open the iP1000tool_V100 folder created after unzipping.
3. Open GeneralTool.exe.
B
C
D
4. Select the connected USB port number from USB PORT (A).
< How to print the shipment inspection pattern >
1. Select TEST PATTERN 1 (B), and the shipment inspection pattern 1 will be printed.
(Refer to APPENDIX 1, SHIPMENT INSPECTION PATTERN 1.)
< How to set the destination >
1. In SET DESTINATION (C), select the model name "iP1000" (common to all destinations), and the
destination will be set.
2. Click DEVICE ID (D), and confirm the model name indicated in the (E) area. Or, confirm the model
name on the shipment inspection pattern printout.
< EEPROM reset >
After marking the EEPROM CLEAR check box, perform the shipment inspection pattern printing. The
EEPROM will be reset.
(When the waste ink counter is re-set, it is not re-set to zero, but to 3,000mg.)
Shipment inspection pattern printing
Destination setting in EEPROM

EEPROM reset

Windows 98 / ME / 2000 / XP (J/E version) : QY9-0065
Provided by SSIS (Download "iP1000 Service Tool" from software download in
SSIS.)
E
A
F
20