Table of Contents
Advertisement
Organization of This Manual
National Instruments Corporation
This manual describes the electrical and mechanical aspects of each
module in the VXI-MIO Series product line and contains information
concerning their installation, operation, and programming. Unless
otherwise noted, text applies to all modules in the VXI-MIO Series.
The VXI-MIO Series includes the following modules:
•
VXI-MIO-64E-1
•
VXI-MIO-64XE-10
The VXI-MIO Series modules are high-performance multifunction
analog, digital, and timing I/O modules for VXIbus.
The VXI-MIO Series User Manual is organized as follows:
•
Chapter 1, Introduction, describes the VXI-MIO Series modules,
lists what you need to get started, describes the optional software
and optional equipment, and explains how to unpack your
VXI-MIO Series module.
•
Chapter 2, Configuration and Installation, explains how to
configure and install your VXI-MIO Series module.
•
Chapter 3, Hardware Overview, presents an overview of the
hardware functions on your VXI-MIO Series module.
•
Chapter 4, Signal Connections, describes how to make input and
output signal connections to your VXI-MIO Series module via the
module I/O connector.
•
Chapter 5, Calibration, discusses the calibration procedures for
your VXI-MIO Series module.
•
Appendix A, Specifications, lists the specifications for each
module in the VXI-MIO Series.
•
Appendix B, Optional Cable Connector Descriptions, describes the
connectors on the optional cables for the VXI-MIO Series modules.
xi
About
About
This
This
Manual
Manual
VXI-MIO Series User Manual
Advertisement
Table of Contents
