Troubleshooting; Maintenance And Care - LEITZ i-Lam Touch A3 TURBO Operating Instructions Manual

Problem
When pressing the Reverse button,
the pouch is not being reversed but
transported further.
The laminator always runs at the
same speed regardless of the thick-
ness of the material.
A
B
8


Troubleshooting

Retrieve a pouch that has not been inserted correctly
•
Press and hold the Reverse button.
The pouch is driven out again at the input tray.
•
Assist the reverse motion by carefully pulling at the pouch.
The reverse motion ends as soon as you stop pressing the button.
Cause
Normal behaviour because the
pouch has already left the front part
of the laminator.
Thickness sensor defective.

Maintenance and care

In order to remove superfluous adhesive from inside the device,
clean the rollers regularly as described here:
•
Switch on the laminator ( ). Wait until the READY indicator lights
green.
•
Fold a sheet of unused copying paper once in the middle. Insert
the supplied Laminator Cleaning Sheet into the folded paper (see
figure A).
•
Insert the paper with the folded side first into the input tray 3–5
times (see figure B).
To clean the housing:
•
Pull out mains plug and wait for the device to cool down.
•
Wipe the exterior with a soft, damp cloth and a dishwashing deter-
gent.
Remedy
None.
Please let the laminator be
inspected by customer service.