Setup 3: Connect The Mains Lead; Setup 5: Turn On The Display And Other Equipment - Sony MFM-HT205 Owner's Record

Setup 3: Connect the mains lead

1 Connect the supplied mains lead securely to the
display's AC IN connector.
2 Connect the other end securely to the mains.
2
to the mains
mains lead (supplied)
Setup 4: Replace the connector
cover
While pressing the hooks, push the connector cover
onto the display until it clicks.
1
to
AC IN
connector cover
Setup 5: Turn on the display and
other equipment
1 Press the 1 (power) switch on the front of the
display.
The 1 (power) indicator lights up in green.
2 Turn on the computer or other video equipment.
3 Press the button to select the desired input
signal.
The input signal will change each time you press the
On-screen message
DVI-D: PC 1
HD15: PC 2
TV channels
: COMPONENT
or : VIDEO 1
or : VIDEO 2
Tips
• You can also select the inputs using the input select buttons on the
remote control.
• When you select the TV input, the number of the selected channel is
displayed in the upper right corner of the screen.
• When using the PIP or PAP function, use "PIP/PAP" in the "PIP/PAP"
menu in the "Option" menu to select the input source for sub picture
(page 27). If the TV input is selected for sub picture, you can change
the channel using the PROG +/– buttons.
• When you switch the TV channel while listening or operate your PC,
video or decoding device, switch the input to TV, then press PROG
+/– or 0-9 buttons. If you press PROG +/– or 0-9 buttons, the input
cannot be automatically switched to TV.
13
PROG
lights in green
w
button.
Input signal configuration
DVI-D input connector (digital
RGB) for PC 1
HD15 input connector
(analog RGB) for PC 2
TV
Y/P /P Component Video
B R
input jacks for COMPONENT
Analog RGB/composite video
input jack for VIDEO 1
Constant TV signal output
Composite/S video input jacks
for VIDEO 2
GB