Table of Contents
Advertisement
Related Documentation
© National Instruments Corporation
•
DAQ hardware documentation—This documentation has detailed
information about the DAQ hardware that plugs into or is connected to
the computer. Use this documentation for hardware installation and
configuration instructions, specification information about the DAQ
hardware, and application hints.
•
Software documentation—You may have both application software
and NI-DAQ documentation. NI application software includes
LabVIEW and Measurement Studio. After you set up the hardware
system, use either your application software documentation or the
NI-DAQ documentation to help you write your application. If you
have a large, complicated system, it is worthwhile to look through the
software documentation before you configure the hardware.
•
Accessory installation guides or manuals—If you are using accessory
products, read the terminal block and cable assembly installation
guides. They explain how to physically connect the relevant pieces
of the system. Consult these guides when you are making the
connections.
The following documents contain information you may find helpful:
•
DAQ Quick Start Guide, located at
•
DAQ-STC Technical Reference Manual, located at
•
NI Developer Zone tutorial, Field Wiring and Noise Considerations
for Analog Signals, located at
•
NI-DAQ User Manual for PC Compatibles, located at
ni.com/manuals
•
NI-DAQ Function Reference Help. You can access this help file by
clicking Start»Programs»National Instruments»NI-DAQ»
NI-DAQ Help.
•
PCI Local Bus Specification Revision 2.2
•
PICMG 2.0 R3.0, CompactPCI Core Specification
•
PXI Specification Revision 2.0, available from
ni.com/manuals
ni.com/zone
xiii
About This Manual
ni.com/manuals
www.pxisa.org
NI 6115/6120 User Manual
- Quick Links:
- About the ni 6115/6120
Hide quick links:
Advertisement
Table of Contents
