Related Documentation; Parts Locator - National Instruments SMB-2163 User Manual

Related Documentation

Parts Locator

STROBE DIO 0
1
2
DDC CLK OUT DIO 8
1 STROBE
2 DDC CLK OUT
3 DIO <0..31>
© National Instruments Corporation
❑
The documentation included with the digital waveform
generator/analyzer and driver software
❑
(Optional) Rack Mount Kit for CA-1000, available from National
Instruments
The NI digital waveform generator/analyzer ships with several documents
designed to familiarize you with different aspects of the module. The
documentation set includes the following pieces:
• NI Digital Waveform Generator/Analyzer Getting Started
Guide—Read this printed document to set up the digital waveform
generator/analyzer and configure it to complete your first acquisition
or generation.
• NI Digital Waveform Generator/Analyzer Help—This online
document provides more in-depth information about the hardware
capabilities of the module, theory of operation, programming flow,
and software reference.
• NI digital waveform generator/analyzer specifications—This printed
document provides specifications for your module.
Refer to Figure 1 to locate connectors on the NI SMB-2163.
3
DIO 1 DIO 2 DIO 3 DIO 4 DIO 5 DIO 6 DIO 7
DIO 9 DIO 10 DIO 11 DIO 12 DIO 13 DIO 14 DIO 15
4 68-Pin Digital Data & Control (DDC) Connector
5 Programmable Function Interface (PFI) <1..3>
6 Shield Ground Lug
Figure 1. NI SMB-2163 Parts Locator Diagram
DIO 16 DIO 17 DIO 18
SMB-2163
DIO 24 DIO 25 DIO 26
High-Speed DIO Accessory
4
3
3
5
DIO 19 DIO 20 DIO 21 DIO 22 DIO 23 PFI 1 PFI 2
DIO 27 DIO 28 DIO 29 DIO 30 DIO 31 PFI 3
6
NI SMB-2163 User Guide