Smart Card Board - HP EliteBook Folio 9480m Maintenance And Service Manual

Smart card board

Description
Smart card board (includes cable)
Before removing the smart card reader, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Hard drive cover (see
b. Hard drive (see
c. Service cover (see
d. Keyboard (see
e. Base enclosure (see
f. Fan (see
g. System board (see
Remove the smart card board:
1. Remove the Phillips PM2.0×2.5 broadhead screw (1) that secures the board to the computer.
2. Rotate the board upward (2) at an angle, and then remove it from the computer (3).
Reverse the removal procedures to install the smart card board.
Battery on page
Hard drive cover on page
Hard drive/SSD drive on page
Service cover on page
Keyboard on page
Base enclosure on page
Fan on page 58)
System board on page
29).
32)
33)
38)
45)
53)
59)
Spare part number
769707-001
Component replacement procedures 65