National Instruments NI-488.2 NI-488.2 User Manual page 70

Chapter 7 Interactive Control Utility
Table 7-3. Syntax for Multi-Device NI-488.2 Calls in Interactive Control (Continued)
Syntax
TestSys addrlist
Trigger address
TriggerList addrlist
WaitSRQ
Function
set udname
set 488.2 v
help
help option
!
–
+
n * function
n * !
$ filename
buffer option
q
NI-488.2 User Manual
Table 7-4. Auxiliary Functions in Interactive Control
Select active device or interface where
new device or interface (for example,
initially to open each device or interface.
Start using multi-device NI-488.2 calls for interface
Display the Interactive Control utility online help.
Display help information about
or auxiliary call (for example,
Repeat previous function.
Turn OFF display.
Turn ON display.
Execute function times where
n
Control function syntax.
Execute previous function
Execute indirect file where
Interactive Control functions to be executed.
Set type of display used for buffers. Valid options are
and . Default is
off full
Exit or quit.
Description
Cause multiple devices to perform self-tests.
Trigger a device.
Trigger multiple devices.
Wait for service request.
Description
udname
or
dev1 gpib0
, where
option
or
help ibwrt
represents the correct Interactive
function
times.
n
is the pathname of a file that contains
filename
.
7-10
is the symbolic name of the
). Call or
ibfind
.
v
is any NI-488.2
option
).
help set
, ,
full brief ascii
ibdev
,
ni.com