National Instruments NI-488.2 NI-488.2 User Manual page 66

Chapter 7 Interactive Control Utility
Table 7-1. Syntax for Device-Level Traditional NI-488.2 Calls in Interactive Control
Syntax
ibask option
ibclr
ibconfig option
value
ibdev BdIndx pad
sad tmo eot eos
ibeos v
ibeot v
ibfind devname
ibloc
ibnotify mask
ibonl v
ibpad v
ibpct
ibppc v
ibrd count
ibrda count
ibrdf flname
ibrpp
ibrsp
ibsad v
ibstop
ibtmo v
ibtrg
NI-488.2 User Manual
Return configuration information where
a configuration parameter.
Clear specified device.
Alter configurable parameters where
a configuration parameter.
Open an unused device;
.
eot eos
Change/disable EOS message.
Enable/disable END message.
Return unit descriptor where
template to use (for example,
Go to local.
Start an asynchronous wait for selected events where mask is a hex or
decimal integer or a list of mask bit mnemonics (for example,
).
TIMO CMPL
Place device online or offline.
Change primary address.
Pass control.
Parallel poll configure.
Read data where
count
Read data asynchronously where
Read data to file where
Conduct a parallel poll.
Return serial poll byte.
Change secondary address.
Abort asynchronous operation.
Change/disable time limit.
Trigger selected device.
Description
option
option
parameters are
ibdev
is the symbolic name of the device
devname
).
dvm
is the bytes to read.
is the bytes to read.
count
is pathname of file to read.
flname
7-6
is a mnemonic for
is mnemonic for
BdIndx pad sad tmo
ibnotify
ni.com