National Instruments NI-488.2 NI-488.2 User Manual page 67

Table 7-1. Syntax for Device-Level Traditional NI-488.2 Calls in Interactive Control (Continued)
Syntax
ibwait mask
ibwrt wrtbuf
ibwrta wrtbuf
ibwrtf flname
Table 7-2. Syntax for Board-Level Traditional NI-488.2 Calls in Interactive Control
Syntax
ibask option
ibcac v
ibcmd cmdbuf
ibcmda cmdbuf
ibconfig option
value
ibdma v
ibeos v
ibeot v
ibfind udname
ibgts v
ibist v
iblck v
LockWaitTime
iblines
ibln pad sad
ibloc
© National Instruments Corporation
Wait for selected event where
of mask bit mnemonics, such as
Write data.
Write data asynchronously.
Write data from a file where
Return configuration information where
a configuration parameter.
Become active Controller.
Send commands.
Send commands asynchronously.
Alter configurable parameters where
a configuration parameter.
Enable/disable DMA.
Change/disable EOS message.
Enable/disable END message.
Return unit descriptor where
interface (for example,
Go from Active Controller to standby.
Set/clear .
ist
Acquire or release an exclusive interface lock for the current process.
Read the state of all GPIB control lines.
Check for presence of device on the GPIB at
Go to local.
Chapter 7
Description
is a hex or decimal integer or a list
mask
ibwait TIMO CMPL
is pathname of file to write.
flname
Description
option
option
is the symbolic name of
udname
).
gpib0
7-7
Interactive Control Utility
.
is a mnemonic for
is mnemonic for
, .
pad sad
NI-488.2 User Manual