Casio WK-200 User Manual page 57

WK200_e.book 55 ページ ２００８年５月１６日 金曜日 午後８時４４分
Recalling a Preset Scale (WK-200 Only)
You can use the following procedure to select from among 17
preset scales, including the standard Equal Temperament.
1.
bq
Press .
2.
4
Press .
Scale Name
E
q
3. bs
Use the (10-key) [–] and [+] keys to select the
preset scale you want. After selecting a scale,
press the key on the keyboard that you want to
use as the root key (C to B).
• There are a total of 17 scales: the 16 shown in the table
above (page E-54) plus Equal Temperament (Number:
00, Scale Name: Equal).
4.
After you are finished, press
scale to the keyboard.
Saving User Scales (WK-500 Only)
You can store up to four "user scales" configured by you in
memory for later recall when you need them.
■ To save a user scale
1. bq
Press .
2. 4
Press .
3.
co
While holding down
cn
to to select an area.
■ To recall a user scale
1.
bq
Press .
2.
4
Press .
3.
ck cn
Use buttons to to select the user scale
you want to recall.
u a l
4
to assign the
ck
, press a button from
Other Useful Digital Keyboard Functions
■ Saving Data on an External Device
(WK-500 only)
• SD memory card (page E-61)
• Computer (page E-68)
■ Maintaining Data in User Scale Memory
(WK-500 only)
After you save data in user scale memory, it will remain there
as long as power is supplied to the keyboard. However, if you
disconnect the AC adaptor when there are no batteries
loaded, data in user scale memory will be deleted.
Tips for Maintaining Data
• Use both batteries and the AC adaptor together.
• Make sure that batteries with sufficient power are loaded
whenever you disconnect the AC adaptor.
• Connect the AC adaptor to the keyboard and plug it into a
power outlet before replacing batteries.
Before connecting or disconnecting the AC adaptor or
1
replacing batteries, first press
Using the Current Scale Notes for Auto
Accompaniments
You can use the following procedure to reflect the scale you
adjusted using the scale fine tune or the quarter tone function,
or the preset scale you selected with the preset function in
Auto Accompaniments.
1. ct
Press and then use the
and [6] ( ) keys to display "OTHER" (page
E-6).
Flashes
O T H E R
2.
bs
Press (10-key) [7] (ENTER) key.
3.
bs
Use the (10-key) [4] (
to display "AcompScl".
4.
bs
Use the (10-key) [+] key to select on.
to turn off power.
bs
(10-key) [4] ( )
) and [6] ( ) keys
E-55