Cassette Playback - Vitek VT-3465 Manual Instructions

Random playback
1. To random playback all tracks on the disc,
press the REP/RAN button four times in the
playback mode, "RANDOM" will appear on
the LCD-display.
2. To cancel random playback of all tracks,
press the REP/RAN button once again,
"RANDOM" will disappear from the LCD-dis-
play.
Note: These functions are active only in the
playback or pause mode.
PROGRAMMING THE PLAYBACK
You can program playback of tracks in the de-
sired order.
1. Switch on the unit. Set the FUNCTION switch
to the AUX(MP3) position.
2. Press and hold the PLAY/PAUSE/USB but-
ton on the unit to move to the USB playback
mode.
3. In the stop mode, press the PROG button
once. "PROGRAM", track number "P01" will
appear on the LCD-display.
4. Select the desired track, consequently
pressing the
5. To move 10 tracks forward or backward
press and hold the -10/FOL- and +10/FOL+
buttons (to select album press and hold the
buttons).
6. To store the selected track press the PROG
button. The number of the track will change
to "Р02".
7. Repeat points 3-6 to program each of the
following tracks. You can program up to 99
tracks
8. To playback programmed tracks, press the
PLAY/PAUSE button.
Note:
To pause programmed playback press the
STOP button.
To resume programmed playback press the
PLAY/PAUSE button.
To cancel program mode press the STOP
button or open the disc slot lid, eject the
USB-device from the corresponding jack, or
set the FUNCTION switch (4) to another po-
sition.
Note: Maximal number of tracks in a folder:
999. Maximal number of folders: 255.
Downloaded From Disc-Player.com Vitek Manuals
3465IM.indd 7 3465IM.indd 7
or buttons.
Note: This unit does not support playback
from HDD discs and some MP3 players.

CASSETTE PLAYBACK

1. Set the FUNCTION (4) switch to the
TAPE(OFF) position.
2. Press the STOP / EJECT button to open the
cassette receiver lid. Insert a cassette with
the records and close the lid.
3. Press the PLAY button to start playback of the
cassette.
4. Press the STOP / EJECT button to stop play-
back.
Pause the playback
Press the PAUSE button
To resume playback press the PAUSE button
once again.
RECORDING ON THE CASSETTE FROM RA-
DIO
1. Set the FUNCTION (4) switch to the RADIO
position.
2. Perform steps 2 and 3, from the "Radio re-
ception" section, to tune to the station you
want to record.
3. Insert a blank cassette in the cassette re-
ceiver and close the lid.
4. Simultaneously press the RECORD and PLAY
buttons to switch on the record mode.
5. Press the STOP / EJECT button to cancel the
record mode.
Recording on the cassette from a CD
1. Set the FUNCTION (4) switch to the
AUX(MP3) position to select playback from a
CD.
2. Insert a CD disc into the CD slot and close
the lid.
3. Insert a blank cassette in the cassette re-
ceiver and close the lid.
4. Simultaneously press the RECORD and PLAY
buttons.
5. Press the PLAY / PAUSE (13) button to start
playback of a CD or records from the USB-
device you want to record.
6. Press the STOP / EJECT button to cancel the
record mode.
Note: return to the cassette playback mode,
rewind the cassette to the beginning to lis-
ten to the records made.
7
ENGLISH
17.09.2010 10:46:23 17.09.2010 10:46:23