Bosch D1260 Installation Manual page 15

.
5. Scroll down the list of commands in the lower
pane to "(33) Service Walk - (Use 99 + Enter
key)."
6. Double-click on the P cell.
A dialog box appears with the different settings for
the Service Walk command.
For the D7412G, D7412, D7212G, and D7212
Control Panels, the Service Walk command must
be set to E (enabled) or P (password enabled) to be
accessible from the D1260/D1260B Keypad.
7. Click on either E or P.
8. Click OK.
9. Select "FUNCTION LIST (9000MAIN)" in the
D7412 Program Record Sheet tree.
10. In the pane below, scroll down the menu list to the
next open Menu Item space for the keypad
(assuming it is CC Address 1).
Bosch Security Systems | 9/04 | 48101E
D1260/D1260B | Installation Guide | 4.0
11. Double-click on the 0 cell to open a dialog box to
12. Enter a Data Value from 0 to 33.
13. Click OK.
Menu Item 15 is now set to Function 33 but still does
not appear in the keypad menu.
14. Double-click on the yellow No cell to open a
15. Select Yes and click OK to exit.
A green Yes cell appears next to the Menu Item.
16. Follow Steps 10 to 12 in Section 4.3.1 D9412G,
The Service Walk command now appears in the
D1260/D1260B Keypad display
Programming the Control Panel
change the Function number.
dialog box to change the value.
D9412 and D9112 Control Panels on page 13 to
update the control panel.
15